Show simple item record

dc.contributor.advisorSebayang, Kerista
dc.contributor.advisorSardjono, Prijo
dc.contributor.authorLamsyah, Firman
dc.date.accessioned2019-11-18T03:17:31Z
dc.date.available2019-11-18T03:17:31Z
dc.date.issued2016
dc.identifier.urihttp://repositori.usu.ac.id/handle/123456789/20589
dc.description69 Halamanen_US
dc.description.abstractTelah dilakukan penelitian pada pengaruh suhu sintering magnet NdFeB terhadap sifat fisis, sifat magnet dan struktur kristalin. Suhu sintering yang divariasikan 400oC,700 oC, 900 oC dan 1000 oC dengan penahanan selama 1 jam.Karakterisasinya meliputi sifat fisis (bulk density), magnetik(fluks density dan VSM) dan struktur kristalin (XRD). Proses pembuatan magnet NdFeB dari bahan flakes NdFeB pada pengaruh suhu sintering, dimana bahan dimilling selama 72 jam menggunakan Toluene. Proses pembuatan magnet tersebut dilakukan dalam vacuum dengan media gas nitrogen.Berdasarkan analisa struktur XRD pada pembuatan magnet NdFeBdari suhu sintering 400 oC hingga suhu 1000 oC struktur kristalnya berubah. Kuat medan dan bulk density magnet NdFeB yang didapatkan pada pengaruh suhu sintering semakin menurun/kecil. Hasil dari pengujian VSM pada serbuk kristal NdFeB didapatkan bahwa tanpa disintering nilai remanen 37,34 emu/g , koersifitas 1,07 kOe dan BHmax 0,76 MGOe, nilai-nilai tersebut lebih besar dibandingkan pada suhu sintering 400 oC dan 900 oC dan secara keseluruhan serbuk kristal NdFeB bersifat Semi-Hard Magnetic.en_US
dc.description.abstractResearch on the effect of sinterring temperature in magnet NdFeB on physical properties, magnetic properties and crystalline structure has been done. The sinterring of kind 400oC, 700oC, 900oC and 1000oC with detention for an hour. Characterized includes physical properties (bulk density), magnetic (flux density and VSM) and crystalline structure (XRD). The process of making magnet NdFeB of flakes NdFeB on the effect of sinterring temperature, where the milling on 72 hours using toluene. The process of making it do in vacuum with the nitrogen gas medium. Based on the analysis of the structure of XRD in the manufacture of magneticNdFeB of the sinterring 400oCto 1000 oCchanged crystal structure. Strong field and bulk density of the magnet NdFeB that obtained in the effect of sinterring temperature has declined or small. Results of testing VSM on crystal powder without sintering NdFeB found that remanence value of 37.34 emu / g, coersivity 1.07 kOeand BHmax 0.76MGOe, the values are greater than the sinterring temperature of 400 oCand 900 oC and overall crystalline powder is Semi-Hard Magnetic.en_US
dc.language.isoiden_US
dc.publisherUniversitas Sumatera Utaraen_US
dc.subjectSuhu Sinteringen_US
dc.subjectStruktur Kristalinen_US
dc.subjectVacuumen_US
dc.subjectSemi-Hard Magneticen_US
dc.titlePengaruh Suhu Sintering pada Magnet NdFeB (Neodymium Iron Boron) Terhadap Sifat Fisis, Sifat Magnetik dan Struktur Kristalinen_US
dc.typeSkripsi Sarjanaen_US
dc.identifier.nimnipnik120801007


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record