Show simple item record

dc.contributor.advisorMarlianto, Eddy
dc.contributor.advisorSembiring, Anwar Darma
dc.contributor.authorMarfida Putri, Endang
dc.date.accessioned2021-09-09T06:40:26Z
dc.date.available2021-09-09T06:40:26Z
dc.date.issued2013
dc.identifier.urihttp://repositori.usu.ac.id/handle/123456789/42824
dc.description.abstractThis study aims to determine the morphology and composition of natural bentonite and the nature of mechanical, Composite Polypropylene (PP) with natural bentonite filler after chemical purification. For composites, mechanical test (Strength tensile, elongation at break, Young's Modulus), morphology (SEM) and Thermal test of the composite PP / Bentonite chemical purification. The research method is that the process of natural Bentonite modified with a size of 200 process mest (lm) was purified by HCl is used as a filler material. The matrix used is kompatibilizernya PP and PP-g-MA with a variety of natural bentonite (0,1.5,2.5,3.5, and 5) gram, and then inserted into the internal mixer with a temperature of 1800C for 10 min with a rotor speed of 50 rpm characteristics performed for resulting composites for mechanical tests with universal mechanical testing (UTM) and TGA-DTA thermal analysis with tools stratam TAG 24. The results were bentonite the mechanical properties of tensile strength tests decreased with increasing bentonite content, but Young’s Modolus increased with increasing natural bentonite. Obtained from the analysis of thermal melting temperature increases with the addition of natural bentonite.en_US
dc.description.abstractPenelitian ini bertujuan untuk mengetahui morfologi dan komposisi bentonit alam serta mengetahui sifat mekanik, komposit Polipropilena (PP) dengan filler bentonit alam setelah dilakukan pemurnian secara kimia. Untuk komposit, dilakukan uji mekanik (kekuatan tarik, perpanjangan putus, Modulus Young), morfologi (SEM) dan uji termal dari komposit PP/Bentonit pemurnian secara kimia. Metode penelitian dilakukan yaitu proses modifikasi Bentonit alam dengan proses pengerusan menjadi ukuran 200 mest (μm) dimurnikan dengan HCl yang digunakan sebagai bahan pengisi. Adapun matrik yang digunakan adalah PP dan kompatibilizernya PP-g-MA dengan variasi bentonit alam (0,1.5,2.5,3.5,5) gram berat, kemudian dimasukkan kedalam internal mixer dengan suhu 180 selama 10 menit dengan kecepatan rotor 50 rpm karakteristik yang dilakukan untuk komposit yang dihasilkan untuk uji mekanik dengan universal tes mekanik (UTM) dan analisa thermal TGA-DTA dengan alat stratam TAG 24. Dari hasil penelitian Bentonit pada uji mekanik sifat kekuatan tarik menurun dengan bertambahnya kandungan bentonit, akan tetapi Modolus Youngnya meningkat dengan bertambahnya bentonit alam. Dari hasil analisis thermal diperoleh peningkatan suhu titik lebur dengan penambahan bentonit alam.en_US
dc.language.isoiden_US
dc.publisherUniversitas Sumatera Utaraen_US
dc.subjectNatural Bentonite,en_US
dc.subjectPP,en_US
dc.subjectmechanical properties,en_US
dc.subjectmorphology,en_US
dc.subjectthermalen_US
dc.titlePemanfaatan Bentonit Alam sebagai Bahan Pengisi pada Komposit Polipropilena untuk Bahan Tekniken_US
dc.typeThesisen_US
dc.identifier.nimNIM117026019
dc.description.pages66 Halamanen_US
dc.description.typeTesis Magisteren_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record