Show simple item record

dc.contributor.advisorHafni, Kartini Noor
dc.contributor.authorNingrum, Indyra Ratih
dc.date.accessioned2022-02-08T02:13:27Z
dc.date.available2022-02-08T02:13:27Z
dc.date.issued2021
dc.identifier.urihttps://repositori.usu.ac.id/handle/123456789/47407
dc.description.abstractLight material is one option from the problem of collapse and excessive road settlement. In this study, the lightweight material was made from crumb rubber as a substitute for sand with a composition of(10%, 25%, 50%, 75%, 90% and 100%) and curing methods (open air and immersion). The test specimens were made by adopting the ASTM C 109 standard, where the dimensions of the test specimens were (50 x 50 x 50) mm to calculate the specific gravity and tested for compressive strength. The FTIR test examination for industrial solid waste was carried out in the Research Laboratory, Faculty of Pharmacy, University of North Sumatra (USU). The results of processing crumb rubber as fine aggregate (sand), will produce a lightweight mortar material with a decrease in compressive strength from normal mortar but produce a specific gravity that reaches below 1gr/cm3. This proves that this mortar is a lightweight material and indicates that crumb rubber as a substitute for sand does not yet have great potential to increase compressive strengthen_US
dc.description.abstractMaterial ringan adalah salah satu opsi dari permasalahan keruntuhan dan penurunan jalan yang berlebih. Dalam penelitian ini material ringan dibuat dari crumb rubber sebagai pengganti pasir dengan komposisi (10%, 25%, 50%, 75%, 90% dan 100%) dan metode curing (udara terbuka dan perendaman). Pembuatan uji spesimen dibuat dengan mengadopsi standard ASTM C 109, dimana dimensi spesimen uji berukuran (50 x 50 x 50) mm untuk menghitung berat jenis dan diuji kuat tekannya. Pemeriksaan uji FTIR untuk limbah padat industri dilakukan dilaboratorium Penelitian, Fakultas Farmasi, Universitas Sumatera Utara (USU). Hasil pengolahan crumb rubber sebagai agregat halus (pasir), akan menghasilkan mortar material ringan dengan penurunan kuat tekan dari mortar normal namun menghasilkan berat jenis yang mencapai dibawah 1gr/cm3. Hal ini membuktikan bahwa mortar ini bersifat material ringan dan mengindikasikan bahwa crumb rubber sebagai pengganti pasir belum memiliki potensi yang besar untuk meningkatkan kuat tekan, namun sudah mampu menurunkan berat jenis yang mencapai dibawah 1 gr/cm3.en_US
dc.language.isoiden_US
dc.publisherUniversitas Sumatera Utaraen_US
dc.subjectCompressive Strengthen_US
dc.subjectCompressive Strengthen_US
dc.subjectCrumb Rubberen_US
dc.subjectFourier Transform Infra Reden_US
dc.subjectMaterial Ringanen_US
dc.subjectPozzolan Teraktivasien_US
dc.titlePengaruh Variasi Pengganti Pasir dengan Crumb Rubber terhadap Karakteristik Material Ringan Sebagai Bahan Konstruksien_US
dc.typeThesisen_US
dc.identifier.nimNIM170407026
dc.description.pages38 halamanen_US
dc.description.typeSkripsi Sarjanaen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record