| dc.description.abstract | Been done simulation and experimental knife harvester oil palm to determine the
most optimal force be applicable in the harvesting of palm. Knife harvester oil
palm is a tool used to cut bunches and palm midrib. Cutting process requires
cutting force, angle cut, and cutting distance with palm trunks. design blade palm
harvester in the design using solidworks 2011 and simulate the stress distribution
with software ansys workbench 14.5. Force measurements of harvesting on two
research object extraction in the District Mandailing Natal and the University of
North Sumatera. Results of cutting force obtained in Mandailing Natal harvest
cutting bunches minimum strength 569 KgF, maximum 951 KgF, and average
799,1 KgF. The style cut midrib minimum 981 KgF, maximum 1657,9 KgF, and
average 1354,4 KgF. Style cut harvesting in North Sumatra University obtained
the minimum cutting force bunches 952 KgF, maximum 1079 KgF, and average
1018 KgF. The style cut midrib minimum 1864 KgF, maximum 2286, and average
2006 KgF. Measurements minimum cross-sectional area bunches in Mandailing
Natal Regency 453,42 mm2
, maximum 967,20 mm2
,and average 719,15 mm2
.
Measurements minimum cross-sectional area midrib 987,5 mm2
,maximum 1254,4
mm
2
,and average 1120,6 mm2
. Measurements minimum cross-sectional area
bunches in Regency University of North Sumatera949,85 mm2
,maximum 2111,34
mm
2
, and average 1288,6 mm2
. Measurements minimum cross-sectional area
midrib 1920 mm2
, maximum 4522 mm2
, and average 3150 mm2
. It can be
concluded from two palm harvester design tool angle is an angle of 20 ˚ and 30 ˚
obtain optimal force at an angle of 30 ˚ simulation and the greater the angle of
the cut bunches midrib greater cutting force as well as the cross-sectional area
greater cutting force is also getting bigger | en_US |
