| dc.description.abstract | Maintaining potted flowers has been a hobby of the community since ancient times until At this time, in the activity of raising potted flowers there are several things that must be done Like watering potted flowers, sometimes the owner of the potted flower does not have time to water the potted flower, to overcome this problem the author made an indispensable Microcontroller-Based Potted Flower Content Control System. In this series of Microcontroller-Based Potted Flower Control System tools, Arduino is a controller, moisture sensor as a soil moisture detector and water pump will work automatically when the moisture content in the potted flower is dry. The way this tool works is that the moisture sensor will detect the water content in the soil and then when the water content in the soil is dry, the water pump will work automatically pumping water into the potted flower. The data obtained is data when the sensor reads the condition of the soil in a dry state with a percentage value of 0-49% or < 50%. The tool will work and the water pump is on until the soil condition is moist with a percentage value of 50-69% or < 70%. This tool will disable the pump when the sensor reads the soil condition in a wet state with a percentage value of >70%-100%. The soil condition is dry, so the water pump turns on to water the plants until the soil is moist. | en_US |
