| dc.description.abstract | To deal the with increasing needs of life and the reduction of fossil fuels and increasing human resource in the future, it is necessary to produce more electrical energy In addition, the burning of fossil fuels causes the release of greenhouse gases which cause global warming. Therefore, the use of wind energy sources to produce electrical energy is not new, but the electrical energy produced is of course very limited due to several main factors, such as wind speed in an area, the duration of wind in one day, and the energy conversion equipment used in this research a current source system toll has been designed for wind turbines to power loods without storage media. This toll is designed to increase the current and voltage and how much power a wind turbine can generate to be able to power a loud without a storage medium. Digital anemometer is used to measure wind speed, ACS712 current sensor to measure current, voltage sensor to measure voltage. These sensors are installed on Arduino Uno and data recording is done using SD card. The results of this study indicate that to trun on the load in the form of a lamp with a power of 12 Wait, a minimum wind speed of 2.7 m/s is required which produces a voltage of 8,34 V In this study the results were obtained from data collection with a maximum speed of 4,7 m/s, a maximum voltage of 12.27 V. a maximum power of 7.12 W, and a maximum current of 0,58 A. | en_US |
