| dc.description.abstract | Utilization of waste energy must continue to be developed as a popular
power plant. Heat, flow, vibration, pressure, and light are wasted energy. One
of the uses of this energy is the flow of water pipes. The flow of water pipes
potentially for electric power, water turbines and pico hydro generators are
connected to the water flow pipes which are usually inches in size. The water
turbine is placed at the beginning of the water source both from the tap, after
the wellbore pump and after the water reservoir. This can overcome energy
savings and electricity costs. The laying of this water can be placed in front of
the water faucet. Therefore, in this study, the magnitude of the potential
electrical energy released by the flow of water for 6 faucets, 12, 18, and 23 by
designing and testing tools placed in the water pipe flow entering the reservoir
and after the reservoir for a capacity of 1000 L. From the results of designing
and testing the PLTPH of the water flow at the Foundation Aisyah Maksum's
education included testing of 6 faucets producing 4.88 V, 1.356 Watts, for 12
faucets producing 8.5 V, 2.862 Watts, for 18 faucets producing 13.05 V, 7.02
Watts, and finally 23 faucets producing 17.65 V, 15.497 Watts. Load simulation
in the form of a 220V, 460 Watt transfer pump with 3-50 L/min. Electrical energy
is obtained from the Solar Charge Controller (SCC) which has a DC booster and
stored in the battery. The load has supplied via the inverter to the transfer pump
as alternative energy if the PLN goes out | en_US |
